Vulcan-Hart 1GR35M, 1GR45M, 1GR65M, 1GR85M, 2GR45MF, 2GR65MR, 2GR85MF, 3GR45MF, 3GR65MF, 3GR85MF, 4GR45MF, ML-136407, ML-136408, ML-136409, ML-136410, ML-136417, ML-136418, ML-136419, ML-136420, ML-136421, ML-136422, ML-136423 Fryer User Manual


  Open as PDF
of 20
 
— 13 —
GR SERIES GAS FRYERS
TURNING OFF THE FRYER
(FREE-STANDING MODELS)
1. Turn the thermostat OFF.
2. To keep the pilot lit, turn the gas valve knob
to “I” in PILOT.
3. To shut off all gas to the system, including
the pilot, turn the gas valve knob to OFF.
LIGHTING THE FRYER
(KLEENSCREEN™ MODELS)
WARNING: BEFORE TURNING ON THE
BURNERS, THE FRYER TANK
MUST BE FILLED WITH LIQUID
SHORTENING. NEVER OPER-
ATE FRYER EMPTY OR THE
FRYPOT WILL BE DAMAGED
AND MAY CAUSE A FIRE,
VOIDING YOUR WARRANTY.
A Thermostat Knob
B Gas Control Valve Handle
1. Open the door.
2. Turn thermostat knob to OFF.
3. Push gas valve handle in and turn arm to OFF.
Wait 5 minutes for unburned gas to vent.
4. Push the gas valve handle in and turn to
PILOT.
5. While still depressing the handle, light the
pilot with a lit taper. Continue with steps 3
through 5 until the pilot remains lit when the
arm is released.
6. Push in and turn gas valve handle to ON.
7. Repeat steps 2 through 6 if gas supply is
interrupted.
TURNING ON THE FRYER
(KLEENSCREEN™ MODELS)
• Set the thermostat knob to the desired
temperature.
• When the set temperature has been
reached, the thermostat shuts off gas flow
to the burners.
• The pilot remains lit. The burners will
cycle on and off to maintain the set
temperature.
TURNING OFF THE FRYER
(KLEENSCREEN™ MODELS)
1. Turn the thermostat OFF.
2. To keep the pilot lit, turn the gas valve to
PILOT.
3. To shut off all gas to the system, including
the pilot, turn the gas valve to OFF.
EXTENDED SHUTDOWN
1. Thoroughly drain the fryer. Refer to
DRAINING THE FRYER.
2. Clean the fryer according to CLEANING.
3. Turn the thermostat knob to OFF.
4. Push in the gas valve arm or pilot knob and
turn to OFF.
5. Turn off the main gas shutoff valve.
 previous next