Filter
Top Products
51
6. Reinstall box by reversing steps 1-5.
ACCESS OF CONTROLS INSIDE THE POWER SUPPLY BOX
1. Follow steps 1-8 (stand alone) or 1-5 (with rinse station) under Removal of Power Supply Box.
2. With a
5
⁄16" socket, remove (2) screws securing the supply box cover. (Fig. 81)
Fig. 81
3. Controls are now exposed and can be serviced. To reinstall box reverse steps 1-2.
REMOVAL OR ACCESSING THE SPARK IGNITOR MODULE
1. Follow steps 1-8 (stand alone) or 1-5 (with rinse station) under Removal of Power Supply Box.
2. Follow steps 1-2 under Access of Controls Inside the Power Supply Box.
3. Disconnect all wiring associated with the module. (Fig. 82)
Fig. 82