Vulcan-Hart 7086A1 ML-104494 Oven User Manual


 
13
LIGHTING AND SHUTTING DOWN PILOT
1. Turn on main gas supply.
2. Turn burner valve ON and purge air from line. Turn burner valve OFF.
3. Wait 5 minutes, then turn burner valve ON and depress ignition button. Using a lit taper, ignite oven
pilot (Fig. 5). Continue to hold button in for approximately 30 seconds, then release.
4. If pilot goes out, turn burner valve off and wait 5 minutes before relighting.
5. Repeat this procedure until pilot stays lit.
6. Set thermostat to desired temperature.
Lighting instructions also may be found on the oven control panel.
OVEN PILOT LIGHTER
Fig. 5
Shutdown
1. Turn burner valve OFF.
2. Turn thermostat OFF.
Extended Shutdown
1. Turn burner valve OFF.
2. Turn thermostat OFF.
3. Turn main gas supply OFF.