Filter
Top Products
MODEL C24EA - COOKING COMPARTMENT
F25213 (May 2006)Page 13 of 52
PROFESSIONAL MODEL SHOWN
COOKING COMPARTMENT
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
REMOVAL AND REPLACEMENT
NOTE: The cooking compartment and front panel
are constructed as an assembly and cannot be
separated.
1. Turn off machine to drain steam generator tank.
Allow steamer to complete drain cycle.
A. Turn off water supply.
2. Remove the RIGHT AND LEFT SIDE PANELS
and TOP COVER as outlined in COVERS AND
PANELS.
3. Remove the DOOR as outlined in HINGE
BUSHING.
A. Remove both hinges.
4. Remove the timer, indicator light, on/off switch
(Professional models only), striker and door
switch assembly.
5. Remove the vacuum breaker and hose as an
assembly.
6. Disconnect steam inlet hose from the steam
inlet port.
A. Remove the steam inlet port.
7. Disconnect the drain hose from rear of cooking
compartment.
NOTE: Screws are located on either side of cooking
compartment securing front panel to lower louvered
panel.