Filter
Top Products
MODEL C24EA - COVERS AND PANELS
F25213 (May 2006) Page 6 of 52
RIGHT SIDE SHOWN
COVERS AND PANELS
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
RIGHT AND LEFT SIDE PANELS
NOTE: Removal of left side panel is identical to the
procedure for the right side panel.
1. Remove screws from the bottom of panel being
removed.
2. Pull bottom of panel out and slide down to clear
top cover.
3. Reverse procedure to install.
TOP COVER
1. Remove RIGHT AND LEFT SIDE PANELS.
2. Remove the screws securing top cover to rear
panel.
3. Remove the screws securing top cover to front
panel. Screws are located on either side of the
cooking cavity.
4. Disconnect the delime hose from delime port
fitting.
5. Lift top cover off machine.
6. Reassemble parts removed in reverse order.
7. Check machine for proper operation.