Filter
Top Products
Fig. 49
4. Remove screws (2) securing pilot assembly to
mounting bracket.
5. Reverse procedure to install and check for proper
operation.
When installing, do not bend and kink the
capillary tube or damage to the control may occur.
NOTE: When installing, ensure orifice hood is aligned
and centered in the burner assembly opening.
GRIDDLE BURNER ORIFICE HOOD
Shut off the gas before servicing the
unit.
All gas joints disturbed during
servicing must be checked for leaks. Check with a
soap and water solution (bubbles). Do not use an open
flame.
1. Remove CONTROL BRACKET.
2. Remove the orifice hood from fitting.
Fig. 50
3. Reverse procedure to install and check for proper
operation.
NOTE: When installing, ensure orifice hood is aligned
and centered in the burner assembly opening.
CHARBROILER BURNER
Shut off the gas before servicing the
unit.
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
Fig. 51
Charbroiler Burner Components - Front View
• [1] Grate
• [2] Radiant
• [3] Burner
• [4] Deflector
1. Remove grate [1] from charbroiler.
ENDURANCE / CHALLENGER MODULAR SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS
Page 23 of 38 F45471 Rev. A (0615)