Filter
Top Products
— 8 —
PL-40677-1
Drain
Valve
Gas Control
Valve Knob
Thermostat
Knob
LIGHTING THE PILOT
1. Turn thermostat OFF. Thermostat is located behind the door (Fig. 3).
MODEL EF3
Fig. 3
2. Push gas control valve knob and turn to OFF (Fig. 4). Wait 5 minutes for unburned gas to vent.
3. Push and turn gas control valve to the "I" in PILOT (Fig. 5).
4. While still holding knob in, light the pilot with a lit taper. Continue to depress knob until pilot remains
lit when knob is released.
If pilot does not remain lit, repeat Steps 2, 3, and 4.
5. Depress and turn gas control knob to ON (Fig. 6).
6. If gas supply is interrupted, repeat Steps 1-5.
Fig. 4 Fig. 5
TURNING THE FRYER ON
To turn the fryer on, set the thermostat knob to the desired temperature. After the set temperature has
been reached, the gas control shuts off gas flow to the burners. The pilot remains lit. The burners will
cycle on and off, maintaining the set temperature.
Fig. 6