Vulcan-Hart EV48SS Double Oven User Manual


 
10 F-38251 (09-13) REV F
OPERATION
THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN
OPERATING, CLEANING OR SERVICING THE RANGE.
CONTROLS (Fig. 6)
Model EV36 Shown
Fig. 6
Element Controls Infinite load switches that control and maintain heat to the surface plates. The
controls are arranged in pairs; the left knob controls the front plate and the right
knob controls the rear plate. NOTE: On 480 volt units, French plates are
controlled with a 3-heat switch (HIGH = 2000 watts, MED = 1000 watts, LOW =
500 watts).
Hot Top Switch (Not shown.) A thermostat (1-10) controls and maintains heat to the top section.
Select desired heat level, (1 is minimum, 10 is maximum).
Griddle Thermostat (Not shown.) Regulates the amount of heat needed to maintain the set
temperature. Each 12" (305 mm) section of the griddle has its own thermostat
with a temperature range of 200°F (93°C) to 550°F (288°C).
Griddle Indicator Light (Not shown.) Will be lit until the selected temperature is reached or when it is
being maintained.
Oven Thermostat Regulates the amount of heat needed to control and maintain oven temperature
around the desired set temperature. The temperature range is from 200°F
(93°C) to 550°F (288°C). Turn dial counterclockwise to increase temperature
and clockwise to decrease temperature.
Infinite Switch for Oven Provides control for top browning element. Adjust as needed for the amount
Top Heating Element of top heat required in order to brown product as desired. NOTE: Infinite switch
not available on 480 volt units. This position on the panel will be filled with a
panel plug.
Oven Indicator Light Will be lit until the selected temperature is reached or when it is being
maintained.
Element Control
Knobs
Oven Infinite
Switch Knob
Oven Indicator Light
Oven Thermostat
Knob