Filter
Top Products
– 12 –
Gentle Bake Button
Selects the gentle bake time setting. A roast time must first be set. The gentle bake time can then be set
at the roast time value or less. The gentle bake time will be the portion of roast time to operate in the gentle
bake mode. Gentle bake mode will start first. When the gentle bake time has lapsed, the remainder of the
roast time will be in the non-gentle bake mode.
Use Gentle Bake when cooking delicate product, such as strudel, muffins, cupcakes, meringue pies, etc.,
to keep product from forming waves on the top.
Use the Gentle Bake Button to switch between the selection of gentle bake mode and no gentle bake mode
time setting. A gentle bake mode time of zero means no gentle bake mode will occur.
The light in the Gentle Bake Button is lit during gentle bake mode.
Gentle Bake Mode
1. The fan cycles (45 seconds ON and 45 seconds OFF) throughout the gentle bake mode.
2. The fan stays on while the heat cycles in hold mode.
3. The fan stays on while heat cycles at 100% power when not timing.
4. Can be switched at any time.
Stop / Start Button
1. Starts timing a product in the mode selected if a cook time has been set.
2. Stops timing a product if a timing sequence is already in progress.
Hold Button — Selects Hold mode.
1. Allows selection of hold temperature.
2. Temperature indication of ---°F (---°C) indicates no hold mode.
Hold Button Light — Is lit when in the Hold mode.
1. When not timing, allows setting/enabling a hold mode setting of ---°F (---°C), meaning no hold will
take effect.
2. Any other temperature means that when the actual cook time has ended, the oven will enter the Hold
mode and use the hold temperature.
On / Off / Oven Cool Switch
1. ON turns oven control circuits on.
2. OFF turns oven control circuits off.
3. OVEN COOL allows the fan motor to run with the door ajar to speed oven cooling.
Gas Valve — When ON, allows gas to flow to the ignition system.
LIGHTING THE GCO2C OVEN
1. Turn manual gas valve ON.
2. Push ON / OFF / OVEN COOL switch to the ON position and set THERMOSTAT to its maximum
setting. The HEAT light should come on. If HEAT light is not on, make sure the door is closed.
3. If the oven fails to light, push the ON / OFF / OVEN COOL switch OFF. Wait 5 minutes before trying
to re-light the oven.