Filter
Top Products
— 12 —
Tools required:
7
/16 socket (magnetic)
1
/4 drive
1
/4 drive universal joint
1
/4 drive 6" extension
1
/4 drive ratchet
1. Remove platen cover (Fig. 3).
2. Remove all bolts from platen. Remove platen surface. (Fig. 4)
Fig. 3 Fig. 4
3. Clean surface thoroughly. Make sure all foreign particles are removed from both surfaces (Fig. 5).
4. Attach new surface to platen with new (10) short and (2) long
1
/4-20 special bolts and (12)
1
/4-20
locknuts. Tighten all bolts and nuts finger tight. (Fig. 6)
Fig. 5 Fig. 6