Vulcan-Hart GRC45F ML-12 Fryer User Manual


 
– 26 –
Timers through :
1. Press
and enter the program mode. PROGRAM is displayed in the window.
2. Press
. The LED's on timers through are lit and SELECT PRODUCT is displayed
in the window.
3. To select a timer, press one of the lit timer numbers; CK# 00:00 and TIME are displayed in the
window.
4. Enter the desired time using keys
through . The time is displayed in the window. After
entering the time, press
; SELECT PRODUCT is displayed in the window and the LED's
on timers
through are lit.
5. Repeat steps 3 and 4 to program the remaining timers or press
to exit the program
completely.
Advanced Time Features
Each timer has additional timing functions that can be programmed to fit your particular operation.
DUTY TIME - Notifies the operator during a fry cycle to perform a particular task (shake a
basket, flip a product, etc.). When the remaining cook time is the same as the Duty time, a
beeper sounds and DUTY # displays in the window. Press the flashing timer number to silence
the beeper. The beeper cancels after 5 seconds if not silenced.
HOLD TIME - Starts after the initial timer beeper is silenced; HD# XX:XX is displayed in the
window. After timing out, a beeper sounds. Press the flashing timer number to silence the
beeper. The beeper cancels after 5 seconds if not silenced.
COMPENSATED TIME - Automatically adjusts the time for variations in load sizes.
STRAIGHT TIME - Does not adjust time for variations; used for regular timing operations.