Filter
Top Products
-
16 -
20. Reinstall the tension rod cover and
tighten screws. Fig. 18
21. Check range of motion as shown in
Fig. 19. The assembly should lock at the
90˚ and 47˚ positions. Assembly should
release from locked positions when
handles are squeezed together. Do not
force unit down, it should lower under its
own weight when the handles are
squeezed. The cooking surface of the
griddle top head assembly should just
lightly touch the griddle surface of the
bottom plate when the assembly is in the
down position.
22. Repeat proceeding steps as needed for
each griddle top head assembly.
Fig. 19
Fig. 18