Filter
Top Products
SPECIFICATIONS
Reservoir Jacket Fluid
• Water - Use only distilled water for partial re-filling of the jacket (purchase locally).
• Dowfrost heat transfer fluid Part No. 558038 (5 gallon). Use during a complete re-fill of the jacket with new
fluid. Refer to service procedures for volumes.
ELECTRICAL SPECIFICATIONS
MODEL KW PHASE
Amperage per Line Minimum Circuit Ampacity
208V 240V 480V 208V 240V 480V
K20EL/ELT
12
1 57.7 --- --- 75 --- ---
3 33.3 --- 14.4 45 --- 20
16
1 --- 66.7 --- --- 85 ---
3 --- 38.5 --- --- 50 ---
K40EL/ELT
K60EL/ELT
18 3 50.0 43.3 21.7 65 55 30
K40EL/ELT
K60EL/ELT
24 3 66.6 57.7 28.9 85 75 40
The 208/240V electric kettles are wired from the factory for a 208V 3-phase supply. If connecting to 240V 3-phase
supply, the primary voltage tap on the transformer must be changed to this voltage. For connecting to a single
phase supply, the wiring between terminal block and contactors must be changed as shown in the WIRING
DIAGRAMS.
OPERATION, CLEANING AND
MAINTAINENCE
Refer to F35457 Installation & Operation Manual for
specific instructions. The manual includes:
• A page from the Stainless Steel Care and
Cleaning Guide for proper care and cleaning of
stainless steel.
• Draw-Off Valve and Plug Valve dissassembly &
cleaning instructions.
Electric Stationary and Tilting Kettles - General
F45472 (1112) Page 4 of 29