Filter
Top Products
K Series Gas Kettle with Power Tilt Option - Control Box Area
SEQUENCE OF OPERATION
(KETTLE CONTROL CIRCUIT)
Refer to Schematic diagram AI3537 for stationary and
manual tilting kettle models. Kettles with Power Tilt,
refer to Sequence of Operation - Power Tilt Option and
schematic diagram AI3538.
1. Conditions.
A. Kettle connected to 120VAC supply and is
properly grounded.
B. Kettle connected to correct gas supply and
the supply is on.
C. Power switch (1S) and light (1LT) (amber)
are off.
D. Low water light (2LT) (red) is off.
K Series Gas Kettles 2/3 Jacketed Stationary and Tilting - ELECTRICAL OPERATION
Page 35 of 44 F45461 Rev. A (0713)