Vulcan-Hart K6ETT Hot Beverage Maker User Manual


 
— 10 —
ELECTRIC TILTING COUNTER KETTLES
SYMPTOMS POSSIBLE CAUSES/REMEDY
Power switch not turned on/Turn on kettle power switch.
Kettle unplugged/Plug kettle in.
Breaker tripped or turned off/Reset or turn breaker on.
Internal fuse failed/Call authorized servicer.
Controls failure/Call authorized servicer.
Power switch not turned on/Turn on kettle power switch.
Thermostat not set/Set thermostat to desired level.
Kettle is up to set temperature/If higher temperature desired, increase
thermostat setting.
Kettle not positioned up right/Tilt kettle up till tilt lock latches.
Kettle low on water, low water light is on/Fill jacket and vent per
procedure in Installtion & Operation manual.
Controls failure/Call authorized servicer.
Heating element failure/Call authorized servicer.
Controls failure/Call authorized servicer.
No vacuum in jacket/Refer to venting instructions in Installtion &
Operation manual.
Wrong supply voltage for kettle/Check that data plate matches building
supply voltage or call authorized servicer.
Low voltage to unit/Call authorized servicer.
Kettle not coming
on, no power light.
Kettle not heating,
no heat light
Kettle not heating,
heat light is on
Kettle heats up slow
or will not come
to boil
K6ETT, K12ETT, K20ETT ELECTRIC COUNTERTOP KETTLE TROUBLESHOOTING