Vulcan-Hart ML-126212 Oven User Manual


 
– 11 –
Setting an Early Warning Buzzer
Assume roasting time is one hour and fifteen minutes and it is currently 2 o’clock. The cycle completes
and the buzzer will sound at 3:15. If you want an early warning buzzer for basting or whatever reason,
program as follows:
DISPLAY TIME
Press 3:15 Displays the sum of the current time plus the roasting time.
Press + 3:00 Buzzer will sound at 3:00.
Press START. Roasting begins.
At 3:00, interim buzzer sounds. Press to silence.
At 3:15, roasting stops and buzzer sounds again. Press to silence.
Setting End Time (Delayed Start)
Assume roasting time is one hour and fifteen minutes and it is currently 2 o’clock. If you want to finish
roasting at 4:00, program the Automatic Control as follows:
DISPLAY TIME
Press 3:15 Displays sum of current time plus roasting time.
Press + 4:00 Roasting will stop at 4:00.
Press START. Red light on the START/STOP button is lit.
Rotisserie stays off until:
Roasting begins at 2:45. Colon flashes.
Roasting stops at 4:00; buzzer sounds. Press to silence.
Interrupting an Automatic Cooking Operation
If you want to temporarily interrupt an Automatic Cooking Operation, press START/STOP.
Red light on the START/STOP button flashes.
Colon stops flashing.
Rotisserie stops.
Heat lamps and elements go off.
Automatic Control retains the set temperature and the remaining roasting time.
Current temperature and remaining roasting time are displayed.
Temperature decreases because heating is off. The control does not compensate.
To restart, press START/STOP again. The Automatic Cooking Operation will resume.
Stopping an Automatic Cooking Operation
When an Automatic Cooking Operation is completed, a buzzer sounds.
If you want to temporarily interrupt an Automatic Cooking Operation, see above.
If you want to abort an Automatic Cooking Operation, turn Main Power dial to "0".
Temperature and Roasting Time remains in memory, not the remaining cooking time.
Changing A Setting
All settings, except Time of Day, can be changed before, during, or after the cooking process. Time of
Day cannot be changed during an Automatic Cooking Operation. After a change, operation continues
according to new values.