Filter
Top Products
– 14 –
Programming Menu Buttons
1. Before entering the program mode, you must first press a Menu Button. Press Menu Button #1. Its
LED will light.
2. To enter Program mode, press and hold both and simultaneously until time display shows
"PROG" (approximately 2 seconds). The LED on Menu Button #1 and Cooking Process Indicator
will start blinking.
3. Cook function time and temperature will be programmed first.
Press and hold while pressing or to adjust to temperature desired.
• Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°).
Press and hold while pressing or to adjust to time desired.
• Maximum time setting is 5 hours, 59 minutes.
4. Program the Grill function for Menu Button #1.
Press . The Grilling Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold while pressing or to adjust to temperature desired.
• Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°C).
Press and hold while pressing or to adjust to time desired.
5. Program the Warm/Hold function for Menu Button #1.
Press . The Warm/Hold Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold while pressing or to set temperature for the hold cycle.
You cannot program a time for the warm/hold function. If you try to program a time, the buzzer will
sound for 3 seconds, then shut off. After programming of Menu Button #1 is completed, the time
display will show the current time of day.
6. Press flashing Menu Button #1 to lock in the programmed settings.
After programming, the display will show the time and temperature programmed for the Cook
function. If you have programmed "0" time and minimum temperature (32°F [0°C]) for the Cook
function, the displays will show the actual cavity temperature and actual time of day.
7. Continue programming Menu Buttons 2-5 in the same manner.
Verifying Programmed Temperatures and Times
Cook function: Press and hold the desired Menu Button, then press
.
Grill function: Press and hold the desired Menu Button, then press
.
Warm/Hold : Press and hold the desired Menu Button, then press
.
• Only the temperature will be displayed in the Warm/Hold function.
• Time display will show "00:00".