Vulcan-Hart ML-114908 Oven User Manual


 
13
Standard Recipe Display
This screen is displayed after the recipe is saved, indicating the new settings as programmed.
Recipe 1 0:00
Top 8
Bottom 3
Time 1:30
The clock on the top line at the right of the screen is the countdown timer for the cook cycle. It indicates the
time remaining in the cook cycle.
CREATING A TWO-STEP COOK METHOD RECIPE
The TWO-STEP cook mode uses two steps to cook the food. The first step uses the oven's maximum power
(Power Level 10 top and bottom lamps) to "blast" the food for a period of time called FULL PWR TIME. This
speeds up cooking for many products including pizza and frozen foods. The second step is simply an expanded
STANDARD cook mode where you are given the ability to adjust both the top and bottom power in Center and
Outer zones.
The maximum allowable cook time does not change for this mode; therefore, the FULL PWR TIME plus the
COOK TIME must not exceed the maximum COOK TIME limit of 9 minutes and 99 seconds.
Press the PGM button to enter the program mode. Press the 2 button to select recipe number 2. Then press
the 2 button to select the Two-Step cook method.
Select A Cook Method
1 = Standard
2 = Two-Step
Full Power Time
This setting tells the oven how long to run at maximum power in minutes and seconds. Enter the value, using
the 1 through 0 buttons.
Recipe 1 Step 2
Enter Time For
Step 1 - Full Pwr = 1:20
Then Press NEXT
To enter 1 minute and 20 seconds as shown here, press the 1, then press the buttons 2 and 0.
Press the NEXT button to proceed to the next screen.