Filter
Top Products
— 2 —
Installation, Operation and Care of
MODELS VF1, VMF1, VF2, VMF2, VF1D,
VMF1D, VF2D & VMF2D
ELECTRIC FRYERS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
GENERAL
Standard features include stainless steel fry tank and front, a high limit device, twin baskets, and a lift-
out fry tank (20" wide models only) which is easily removed for cleaning.
VF1, VF2, VF1D and VF2D floor model fryers are equipped with 6" adjustable legs. They may be
ordered without legs for installation on a masonry base. The fryers also can be supplied with a 4" toe
base in place of legs as an optional extra.
Optional features include extra fry tanks, a large single basket supplied in place of twin baskets, syphon
and strainer bags, casters (floor models only), stainless steel fry tank cover, and extra sets of twin
baskets or single baskets. Stainless steel side(s) and back are also available optionally.
AUTOMATIC
BASKET MELT
MODEL WIDTH / STYLE CONTROLS LIFT CYCLE
VF1 20" Floor model Mechanical Opt. Opt.
VMF1 20" Countertop Mechanical Opt. Opt.
VF2 24" Floor model Mechanical Opt. Opt.
VMF2 24" Countertop Mechanical Opt. Opt.
VF1D 20" Floor model Solid State Opt. Std.
VMF1D 20" Countertop Solid State Opt. Std.
VF2D 24" Floor model Solid State Opt. Std.
VMF2D 24" Countertop Solid State Opt. Std.
VF90/VFD90 20" Frymate N/A N/A N/A
The VF90 and VFD90 Frymate Work Stations may be installed next to any of the VF Series Fryers.
The top draining section has a lift-out screen and center drain into a 3-quart, slide-out drain pan. The
interior of the cabinet has storage space for 4 standard #200 pans in drawer-type, non-tilt pan slides.
Pans are not supplied with the Frymate.
The Frymate is equipped with 6" adjustable legs. It may be ordered without legs for installation on a
masonry base, or with a 4" toe base in place of legs as an optional extra.