Filter
Top Products
Fig. 21
4. Remove screws securing pilot to the bracket.
Fig. 22
5. Reverse procedure to install and check for proper
operation.
INFRARED BURNER (36IRB/
C36IRB)
Shut off the gas before servicing the
unit.
All gas joints disturbed during
servicing must be checked for leaks. Check with a
soap and water solution (bubbles). Do not use an open
flame.
1. Remove
MANIFOLD COVER, LEFT SIDE
PANEL and RIGHT SIDE PANEL.
2. Remove TOP PANEL ASSEMBLY.
3. Left side:
A. Remove screws securing burner mounting
bracket to broiler frame.
Fig. 23
4. Right side:
A. Disconnect gas supply at broiler.
B. Remove screws securing manifold to
broiler.
Fig. 24
C. Lower the manifold to access burner
mounting bracket screws.
D. Remove screws securing burner mounting
bracket to broiler frame.
Fig. 25
E. Disconnect compression nut from elbow
orifice fitting to access the right side orifice
bracket mounting screw.
F. Remove screws securing orifice bracket to
broiler frame.
SALAMANDER BROILERS RADIANT AND INFRARED - REMOVAL AND REPLACEMENT OF PARTS
F45530 (0814) Page 10 of 17