will then line up
with the bowl
spout. Be sure
that the cone/
strainer is firmly
seated in the
citrus juicer
attachment.
• Turn on juice
extractor switch,
and allow a few
seconds for motor
to reach normal speed before juicing.
• Cut citrus fruit in half crosswise. Place fruit, cut side
down, on the cone/strainer and push down firmly.
Cone/strainer will not turn until pressure is applied.
Cone/strainer will stop turning when pressure is
released. CAUTION: Keep fingers away from
moving parts.
• For cleaning, turn the attachment clockwise to release
from spring clips. Remove the attachment, take cone/
strainer out, and place both bottom side up under
running water, or place on top rack of dishwasher.
• After removing the attachment, remove the juice
extractor bowl and rinse with cool water, or place on
top rack of dishwasher.
9
Cone/Strainer
Drain Spout
Bowl Spout
Spring Clips
Juice Extractor Base
Citrus Juicer
Attachment
(PCA45)
Fig. 4