Filter
Top Products
6
12. Remove plug from power supply if the unit is not
being used.
13. Repeat steps 8 to 10 for continuous popping.
CLEANING AND MAINTENANCE
It is strongly recommended to clean the kettle frequently to
avoid burning excess oil onto the bottom of the inner pot.
After using the popcorn machine, let it cool, and use a
wet cloth to clean the main unit, main body and door.
It is strongly recommended to wash and dry the tray after
each use to avoid any bacteria buildup. The light bulb is
replaceable with a 120 volt/10 watt bulb.
QUICK CLEANING PROCEDURE
Turn the POP control to Off. Pour 4 to 6 ounces of water
(NO detergent is necessary) into inner pot. Switch to POP
to boil the water and let the stirrer turn in order to remove
excess oil stuck on the surface. After cooling, pour out
the water into a deep bowl and discard after about 1 to 2
minutes of boiling. CAUTION: THE KETTLE IS HOT.
Or, remove the kettle and clean it with a Scotch-Brite
®
scouring pad. Do not immerse kettle or electrical plug
in water.