Filter
Top Products
Application 9 Watlow MINICHEF 2000 ■ 21
Application 9
Manual Convection Oven
One Heat Channel
Introduction to Application 9 . . . . . . . . . . . . . . 21
Configuration Mode Quick Reference . . . . . . . . 23
Step 7 Design a Faceplate Overlay . . . . . . . . . . 25
Step 8 Operate the Controller . . . . . . . . . . . . . 26
Application 9 allows you to program to control one temperature channel, a fan and cook-
ing time for a manual convection oven.
Overview of Key Steps
1. Install the MINICHEF 2000.
2. Wire the controller.
3. Configure the controller.
4. Program the menu.
5. Set the controller security.
6. Set the Real-time Clock.
For instructions on Steps 1, 2, 3, 4, 5 and 6, see the Hardware & Software Setup Guide.
7. Design, manufacture and apply faceplate overlay for end-users. (For a suggested
design to suit this application, see this section. For overlay dimensions and guide-
lines, see the Hardware & Software Setup Guide.)
8. Operate the controller. (See this application guide.)
9