Filter
Top Products
26 ■ Watlow MINICHEF 2000 Application 9
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Cook Temp(s)
B Cook Time(s)
C Up (Increment)
D Fan Settings
E Start/Stop
F Down (Decrement)
Start-up
Apply power to the oven.
[`idle] will appear on the display.
If the Real Time Clock option is installed and [setUp] / [time] is programmed, the
time of day will appear on the display.
Set the Menu
Depending on the way the controller was programmed at [Etype] / [Steps] you can
set the menu to run in one step or two.
[Etype] / [Steps] is set to [````1]: Single Step Menu
[Etype] / [Steps] is set to [````2]: Two Step Menu
Single Step Menu
The single step menu consists of one cooking temperature, one cooking time and one fan
setting.
Set the cooking temperatures.
1. Press the Cook Temp key.
[TENP1] and then the cooking temperature value will appear on the display.
2. Press the Up or Down key until the value you want appears on the display.
3. Press the Cook Temp key again.
The cooking temperature has been set.
[`idle] will appear on the display.
Set the cooking time:
1. Press the Cook Time key.
[tinE1] and then the cooking time value will appear on the display.
2. Press the Up or Down key until the value you want appears on the display.
3. Press the Cook Time key again.
The Cooking Time has been set.
[`idle] will appear on the display.