Filter
Top Products
CLEANING INSTRUCTIONS (continued)
CAUTION:
Electric Shock
Hazard
Disconnect appliance from
electric power before
cleaning.
CAUTION:
Hot Surface
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
drawers or cabinet surfaces.
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY Weekly
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
Container for disposal of grease
CLEANING
Disconnect appliance from electric power
Allow to cool before cleaning
Ventilator Section
Remove the grease baffle, pre-filter assembly, grease trough and
grease cup. Empty the grease trough and grease cup.
Remove the pre-filter from the filter frame. Wash and rinse the
filter frame ONLY.
Wash and rinse the grease baffle, grease trough and grease cup in
a sink or dishwasher using mild detergent and warm water. Allow
to air dry.
Reinsert the pre-filter into the filter frame. Reinstall the pre-filter,
grease baffle, grease trough and grease cup.
Roll Warmer Section
Remove roll warmer drawers, drawer inserts and Humitrol racks.
Brush crumbs from drawer slides and interior of warmer cavity with
a bristle brush.
Wash and rinse the drawer inserts and Humitrol racks in a sink or
dishwasher using mild detergent and warm water. Allow to air dry.
Reassemble and reinstall warmer drawers.
Procedure is complete
17