Filter
Top Products
8
OPERATION
Use and Care (Assembly)
To use your Ice Master 3000, begin by assembling the blending jar.
1. Position the rubber gasket down onto the circular fl at surface in the blade
base.
2. Screw blade base on the bottom of the blending jar by twisting the blade base
counter clockwise until tightened onto the blending jar. Make sure that the
blade base is tightly fastened to the blending jar and that the rubber gasket is
properly compressed between the
blending jar and the blade base.
3. Push the lid onto the top of the blending jar. Place the clear lid cap in the
center of the lid or place the stir stick through the center of the lid if blending
liquids or frozen drinks.
4. Place the blending jar onto the motor base so that the bottom of the blade
base is sitting fl at on the motor base.
5. Plug in the cord. Your Ice Master 3000 Blender is now ready to use!
Blending Jar
Stir Stick
Rubber Gasket
Blade Base
Lid Cap
Motor Base
Lid