West Bend 6421Z Hot Beverage Maker User Manual


 
3
3. When water reaches a boil, about 3 minutes at MIN level and eight minutes at MAX level,
kettle will automatically turn off and signal light will go out. If you wish to shut kettle off
before water reaches a boil, push switch to OFF position. Unplug cord from electrical outlet.
Remove kettle from power base and pour water into heat-resistant serving container being
careful of escaping steam.
4. If you wish to reheat water remaining in kettle at a later time, simply set kettle onto power
base, plug cord into electrical outlet and push switch to ON position. Always make sure water
level is between MIN and MAX levels. After water reaches a boil, the kettle will
automatically turn off and signal light will go out. Unplug cord from outlet after use.
CORD STORAGE - The underside of the power base features cord storage. Wrap any excess cord
in area provided, allowing cord to exit through exit channel. Make sure power base rests flat on
counter.
TO CLEAN - Follow same cleaning instructions as given in “Clean Before Using”
section. Always make sure kettle has cooled completely and power base is unplugged
from electrical outlet before cleaning. CAUTION: To prevent personal injury or electric shock,
do not immerse electric kettle, power base, its cord or plug in water or other liquid.
SPECIAL CLEANING TO REMOVE MINERAL DEPOSITS - Over time, mineral
deposits from water will build up on the inside of the kettle. To prevent severe build up of mineral
deposits, which can cause damage to kettle, always empty and clean after each use.
1. To remove mineral deposits, fill kettle to MIN level with white distilled vinegar and add cold
water to the 4-cup level. Close cover until secured and set kettle on power base. Plug cord
into electrical outlet and push switch to ON position. After mixture reaches a boil, kettle will
automatically turn off. Unplug cord from electrical outlet and let kettle stand 30 minutes to
dissolve the deposits.
2. Empty kettle and allow to cool before cleaning, following cleaning instructions as given in
“Clean Before Using” section.
FULL 1 YEAR WARRANTY
Your West Bend Warranty covers failures in the materials and workmanship of this appliance for (1)
year from the date of original purchase. Any part proved to have failed upon examination of the
complete appliance by an authorized service depot of the manufacturer will be repaired or replaced
with a product of equal value which may or may not be identical to the unit being replaced.
This warranty gives you specific legal rights and you may also have other rights, which vary from
province to province. This warranty does not cover damage caused by misuse, abuse, accidents or
alterations to the appliance.
WEST BEND
C
Listed
Please ensure that you enclose the sales slip or proof of date of purchase in order to assure warranty
coverage.
REPLACEMENT PARTS AVAILABLE - Replacement parts may be ordered directly from
from an authorized service center. To view a listing of authorized service centers please visit our
Canadian Products page at www.westbend.com
L5367