Filter
Top Products
4
CONTROL PANEL and FUNCTIONS
LCD DISPLAY: The display indicates when the appliance is ready for use. When
the appliance is first plugged in, there will be an audible beep and the default
program is displayed. “1 3:20” appears on the display. The “1” specifies which
program is selected (1-11 programs) and the “3:20” is the length of the program in
hour: minutes. The position of the marking at the top of the display indicates the
weight of the loaf selected (2.5, 2.0 or 1.0/1.5 lb) with 2.5 lb as the default. The
position of the marking at the top of the display indicates the degree of browning that
is selected (light, medium, or dark) with medium as the default. As the program
proceeds the digits of the time displayed will decrease progressively indicating
remaining time. During operation the status of the program is indicated in the display
with a mark at the active program mode; “Time,” “Preheating,” “Kneading,” “Pause,”
“Rising,” “Baking,” “Keep Warm,” and program “End.”
“START/STOP” Button: The “START/STOP” button is used to start or cancel a
program. A short alert is heard with each press of the “START/STOP” button. Press
this button when the breadmaker is idle to start the program. When the breadmaker
is active, press and hold this button to cancel the program. If you do
cancel the program, the breadmaker will return to its default settings for the chosen
menu selection. All customized settings will be lost if the program is cancelled.You
must set all desired program settings before starting the program. The program
cannot be changed after the cycle has begun, unless you cancel the cycle.
“TIME” Button: “TIME” is used to set a delayed program end time. Only the
following programs can be used with the delay timer: (1) “BASIC,” (3) “FRENCH,” (5)
“WHOLE WHEAT,” (6) “SWEET,” and (7) “DOUGH.” The (4) “SUPER RAPID,” (2)
“QUICK,” (9) “JAM” and (8) “BAKE” programs can not be started with the delay timer.
The delay hours and minutes will be added to the preprogrammed times for the
specific program. The time indicated in the display is the time until the end of the
cycle.
DELAY START: The maximum time delay is 12 hours and 58 minutes per program.
Example: It is 8:30 p.m. and you would like the bread ready for the next morning at
7:00 a.m. Determine the time difference, 7:00 a.m. is 10 hours and 30 minutes
ahead of 8:30 p.m. Press the “TIME” button until 10:30 appears in the display.
NEVER use the time delay function when using perishable ingredients such as milk,
eggs, fruit, yogurt, etc.!
“TEMP” Button: “TEMP” cycles to select the crust darkness: LIGHT (320°F/160°C),
MEDIUM (355°F/179°C), and DARK (390°F/199°C). The default temperature is
MEDIUM; the LCD will display the corresponding temperature value and is only
applicable for the following programs: “WHOLE WHEAT,” “SWEET,” “BAKE” and
“SANDWICH.” The temperatures for “SUPER RAPID” change to LIGHT
(375°F/191°C) MEDIUM (390°F/199°C) DARK (410°F/210°C) and “QUICK” change
to LIGHT (330°F/166°C) MEDIUM (345°F/174°C) DARK (365°F/185°C).
“LOAF” Button: The “LOAF” button adjusts the various programs for the selected
loaf size; 2.5 lb, 2.0 lb or 1.0/1.5 lb. This button is only applicable for the following
programs: “BASIC,” “FRENCH,” “SUPER RAPID,” “WHOLE WHEAT,” “SWEET,”
and “SANDWICH.”
“MENU” Button
: Use the “MENU” button to select the desired program. In general,
use the following suggested programs for the following specialties.