Westinghouse GEK1385W Cooktop User Manual


 
17
USAGE
Manual ignition Models
To light these hotplates:
1. Choose the hotplate you want to use.
2. Turn the hotplate burner control knob to “Hi”.
3. Light with a hand held lighter e.g. match.
Electronic ignition Models
To light these hotplates:
1. Choose the hotplate you want to use.
2. Turn the hotplate burner control knob to “Hi”.
3. Press electronic igniter switch to release sparks
to the burner.
Look at this diagram above which shows you which utensils to use on the hotplates and which utensils should not be used.
ALWAYS use pots and pans with flat bottoms. Uneven or thin bottoms will waste electricity and cook slowly.
ALWAYS use pots and pans which are slightly larger than the hotplate. Small pans waste electricity.
ALWAYS put pots and pans which are dry on the hotplates.
DO NOT use pots and pans which are too large.
Pans which overhang the hotplate more than 50mm can damage enamel cooktops.
USING HOTPLATE BURNERS
Using the Burners of your Gas Cooker
Check the hotplates on your cooker against the diagram
below before you use your cooker for the first time.
NOTE: To save gas, place pots and pans centrally over the
burners and adjust gas so that flames do not go past edges.
WHAT IT IS WHAT IT IS USED FOR
1
Low heat burner 5.1MJ/h
Used for simmering
Used with small pots
and pans
2 & 3
Medium heat burners
9.0MJ/h
• Used for normal cooking
Used with middle size
pots & pans
4
High heat burner
12.0MJ/h
• Used for fast heating
Used with large size
pots & pans
CHOOSING UTENSILS
GOOD BAD
(moisture on hotplate)
BAD
(convex base)
BAD
(oversize)
BAD
(recessed base)
BAD
(undersize)
BAD
(no utensil)
WMAN_540 Upright_Jun11.indd 17 28/06/11 12:07 PM