Filter
Top Products
Page 8 Page 9
SET UP & USE
PARTS & FEATURES
CONTROL PANEL
JAR CAPACITY : Depending on your purchase your blender may have a Glass or Plastic blending jar
PLASTIC JAR : 48 oz (1.5 liters) GLASS JAR : 42 oz (1.25 liters)
• Off/Pulse: Use for thick mixtures.
• Low: Press to set speed level from 1 to 5.
• High: Press to set speed level from 6 to 10.
• Speed buttons: To set speed levels from 1
to 10. Refer to page 10 for speed chart.
1. Turn the blender jar upside down,
and place it at on a sturdy surface.
2. Place the rubber gasket on the
round opening on the bottom of the
blender jar.
3. Turn the blade assembly upside
down, as shown in the picture,
and place the blade end inside the
blender jar opening.
NOTE: · Blades are sharp. Handle with care.
4. Secure the gasket and blade
assembly into place as shown in the
picture. Tighten by twisting the jar
base clockwise. Make sure base is
tightly fastened to blender jar. Once
assembled, turn the blender jar
right-side up.
5. Push the lid on the top of the
blender jar. Secure the lip cap into
the lid.
6. Place the blender jar on the motor
base.
7. Plug in the power cord. Your
blender is now ready to be used.
SET UP & USE
OPERATION INSTRUCTIONS
BLENDER JAR ASSEMBLY
Lid Cap
Lid
Blade Assembly
Blade Assembly
Gasket
Blending Jar
Jar Base
Jar Base
Base
Power Cord
(Not Shown)
Blending Jar
Gasket
Speed Buttons
Power Cord Storage
(Not Shown)
PULSE/OFF Button
1. Make sure appliance is OFF.
2. Place foods to be blended into jar.
3. Place lid on jar, make sure lid cap is
in place.
4. Plug power cord into outlet.
NOTE: · When in use, do not leave blender
unattended. When using hard foods,
such as ice, cheese, nuts and coffee
beans, keep one hand on the lid to
keep blender in place.
5. Select the speed that best suits your
desired task.(See SPEED CHART
Pg. 10).
6. When blending thick mixtures, such
as smoothies, power drinks and
milkshakes press the PULSE button
several times to begin the blending
process. Press the PULSE button for
no more than 5 seconds at a time.
This helps break up the ice.
7. Open the lid cap to add ingredients
while the blender is running and
drop ingredients through the
opening.
NOTE: · Do not remove the lid while the
blender is running
8. When nished, press the PULSE/
OFF button. Make sure blades
have completely stopped before
attempting to remove the blending
jar from the base.
9. Remove lid to pour.
10. Always unplug the appliance when
not in use.
USING YOUR BLENDER
6
1
OFF
2
3
4
5
HIGH
LOW
PULSE
7
8
9
10