Filter
Top Products
SET UP & USE
OPERATION INSTRUCTIONS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept
the entry, check and try again.
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time
from one second to 99 minutes and
99 seconds.
2. If you want to set a power level other
than 100% power, touch POWER, and
then use the number pads to enter
the power level.
3. Touch START/+30 sec. to start
cooking.
Use the digits to set a cooking power
level:
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one
for hour and two for minutes),
3. Touch CLOCK pad again.
NOTE: · When the oven is rst plugged in or
when power resumes after a power
interruptions, the display will show
ENTER CLOCK TIME. If you prefer to
not have the clock displayed, touch
reset.
· You can check the clock time while
cooking is in progress by touching
the CLOCK pad.
1. Touch TIMER.
2. Enter the amount of time by touching
the number pads. Digital time is in
minutes and seconds and set left
to right. Set one digital (a 5 for 5
seconds) or up to four digits (2405
for 24 minutes, 5 seconds).
3. Touch START/+30 SEC.
NOTE: · Time countdown can be seen in
display for 3 seconds before clock or
cooking time is returned to display
· Touch TIMER and then touch
RESET to cancel TIMER during timing
process.
SIGNALS DURING OVEN
SETTINGS
SETTING A COOKING
PROGRAM
SETTING THE CLOCK
SETTING THE OVEN TIMER
Number pad
1, 0
9
8
7
6
5
4
3
2
1
0
Cooking power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Page 12