Filter
Top Products
8
WITH QUESTIONS OR COMMENTS
1-800-447-6737
Removing the crisper and crisper cover
To remove the crisper:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift cover up and slide out.
2. Replace cover by fitting back of cover
against back wall of cabinet. Then lower
front into place.
Changing the light bulb
!!!INSERT WARNING HERE!!!
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the refrigerator
at the main power supply.
Failure to do so could result in electri-
cal shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power
supply.
2. Reach into the refrigerator cabinet to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size, wattage, and shape.
USING YOUR REFRIGERATOR
4390527 9/1/98, 4:32 PM8