Whirlpool 2193496 Refrigerator User Manual


 
Adjusting the crisper cover track
(on some models)
For your convenience, one crisper may be larger than
the other, and your crisper cover may have an adjust-
able track so you can switch positions of the crispers.
This allows you to store celery and other longer items
in a crisper. You can adjust the cover track with the
cover in the refrigerator by removing the crispers and
the glass cover insert.
To remove the center track:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening in cover.
To replace the center track:
1. Insert rear end of track (with hole) into opening in
cover.
2. Lower front end of track into slot.
3. Make sure rear end of track snaps into place on
underside of cover.
Adjusting the freezer shelf
(on some models)
Adjust the freezer shelf to match the way you use
your freezer.
To remove the shelf:
1. Lift entire shelf slightly.
2. Move shelf all the way to one side.
3. Tilt other side up and out of shelf
support cups.
4. Pull shelf up and out.
To replace the shelf:
1. Tilt the shelf and insert into freezer
compartment.
2. Insert one end of the shelf all the way into the
center of the shelf support cups.
3. Lower other end of shelf and insert into the shelf
support cups.
4. Lower shelf into place.
NOTE: The shelf should lower slightly and lock
into place. If the shelf does not appear sturdy,
make sure both ends of the shelf are inserted
into the shelf support cups.
12