Filter
Top Products
ADJUSTING THE REFRIGERATOR SHELVES
11
To remove the shelves:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop.
3. Depending on your model, lift the back or
front of the shelf over the stop.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Slide back of shelf into shelf track in
wall of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
REMOVING THE CRISPER(S) AND COVER
To remove the crisper(s):
1. Slide crisper(s) straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift cover front and remove the cover support.
2. Lift cover up and slide out.
Lift cover front,
then the back.
STYLE 1
STYLE 2
Lift cover front,
then the back.
To replace the cover:
1. Fit cover tabs into lowest cabinet slots
and push in. Lower the front retainers into
place.
2. Insert cover support (with the long tab
toward the front) into the groove on the
underside of the cover.
NOTE: If the support needs adjustment,
turn base clockwise to raise or counter-
clockwise to lower.
Tabs
Cover support
Lower
2201959.v17.c58 7/13/99 3:30 PM Page 11