Filter
Top Products
-.
Using Your Refrigerator
Continued
EXTERIOR MOISTURE CONTROL
4 OFF
l
ON b
Glass shelves are
heavy. Be
careful.
Pull out to the stop, lift the
front
and pull again.
Exterior Moisture Control
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture
from
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove shelves:
1. Remove items from shelf
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing the freezer shelf
To remove shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order
Moving the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up, lift at back, and pull
straight out.
2. Replace in reverse order.
6