Whirlpool 3ET16NK Refrigerator User Manual


 
Removing the drop-in door trim pieces
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.
Removing the snap-off door trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the trim piece.
3. Lift trim piece straight out.
To replace the trim piece:
1. Line up ends of the trim piece with the
button on the door liner wall.
2. Push trim piece straight back until it
snaps securely into place.
3. Replace items on the shelf.
Removing the snap-off door trivets
To remove the trivet:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the trivet.
3. Lift trivet straight out.
To replace the trivet:
1. Line up ends of trivet with the button on
the door liner wall.
2. Push trivet straight back until it snaps
securely into place.
3. Replace items on the shelf.