Whirlpool 3ET16NK Refrigerator User Manual


 
Adjusting the freezer shelf
Adjust the freezer shelf to match the way
you use your freezer.
To remove the shelf:
1. Lift entire shelf slightly.
2. Move shelf all the way to one side.
3. Tilt other side up and out of shelf support
cups.
4. Pull shelf up and out.
To replace the shelf:
1. Tilt the shelf and insert into freezer
compartment.
2. Insert one end of the shelf all the way into
the center of the shelf support cups.
3. Lower other end of shelf and insert into
the shelf support cups.
4. Lower shelf into place.
NOTE: The shelf should lower slightly
and lock into place. If the shelf does not
appear sturdy, make sure both ends of
the shelf are inserted into the shelf
support cups.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller they
get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
12