Filter
Top Products
Removing
the
crispers
and crisper cover
To remove the crispers:
1.
Slide the crisper straight out to the stop.
2. Lift the front.
Pull out to the
stop, lift the front
and pull again.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
Remove the
glass insert.
Lift front of
cover frame,
then the
back.
1.
2.
3.
To replace the cover:
Replace metal cover support on wall
supports in front section of cabinet.
Fit back corner of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
Slide back of alass insert into cover
frame. Then lower front to level position.
Removing the freezer shelf
To remove the shelf:
1.
Lift front of shelf slightly.
2. Lift back of shelf off supports.
3. Replace in reverse order.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation.
The longer cubes are stored, the smaller
they get.
To remove ice:
1.
Hold tray at both ends.
2. Twist slightly.
10