Filter
Top Products
Now start.. .
With cooktop in kitchen.
Lift entire cooktop up from cutout when
repositioning cooktop in countertop
opening.
1
n
Insert the cooktop into the
countertop opening. Center the
cooktop in the cutout. Check that the
front of the cooktop is parallel to the
front edge of the countertop. Check
that all required clearances are met. If
cooktop is not properly positioned, lift
the entire cooktop out of opening to
make adjustments.
clamp
screw and
clamp
assembly
I
burner box
2
n
Insert one clamp tab through
each slot located on sides of the
burner box.
Note: If installing cooktop over a built-
under oven,
Do Not
fasten cooktop to
countertop with clamps. Cooktop will
then be easy to remove if servicing is
ever required.
Injury
Hazard
Do Not over-tighten screws.
Over-tightening screws could cause
iniurv.
3
n
Secure cooktop to countertop
by hand-tightening each screw; then
use a screwdriver to tighten each screw
1 to l-l /2 more turns. Do Not overtighten
screws.
4
w Make the electrical connection,
(See “Electrical requirements” and
“Electrical connection” sections, Panel
B, for details.)
5
n
Turn on the power supply.
6
n
Push in and turn each control
knob to the ‘HI” position. Check the
operation of the cooktop heating
elements and indicator lights.
( Coigratulations! \
Keep Installation Instructions and
Guide close to cooktop for easy
reference. The instructions will
Numbers
correspond
to steps.
Panel C