Filter
Top Products
the csntm% settings
If you need to adjust temperatures in
l Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings
listed
l Wait at least 24 hours between adjustments.
in the chart below as a guide.
l Then adjust the Freezer Control if needed.
r-
-- ---. ----------
RECOMMENDED
CONDITION:
REASON:
CONTROL SETrINGS:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Refrigerator 4
Freezer
A
Refrigerator 3
Freezer
C
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions
Freezer
B
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
E
Refrigerator 4
Freezer
B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way
you use your refrigerator. Glass shelves are
strong enough to hold bottles, milk and other
heavy food items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant
pull.
3. Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1. Lift front of guide. Pull guide forward off
rear support. Repeat for other guide.
2. To replace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
1. Guide rear of shelf into shelf guide.
2. Slide shelf into place.
Be careful when
handling glass items.
a