Filter
Top Products
Before Using Your
Refrigerator
In This Section
Paw
Page
Ckumlng
It . . . . . . . . . . . - . . . . . . . . . . . . . . . . . . - .._-.......... . . . . . .
5
Installing lt “...............I..............-.”..............“.
5
plugging
lt in .- . . . . . . . . . . . . . . . . ..-...._....._...I.-....... 5
Leveling it I....l.......l.-. ......-...l...-...l.l . . . . . . 6
ft is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces-
sary. See cleaning instructions on page 17.
Plugging it in
Recommended Grounding Method
A
115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit sewing only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
3-prong grounding
type wall
receptacle,
c
Refrigerator
1
power cord 7
grbunckg plug
Installing it
1. Allow % inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
3. The refrigerator can be flush against the wall.