Whirlpool AKZ 517 Appliance Trim Kit User Manual


 
THE ALTERNATIVE PROGRAMMERS
There are two types of programmer cov-
ered in this section - push button & touch
control. Both programmers have the same
symbol variants & functions but may vary
in their method of operation.
The push button programmer
Sym-
bol
Sym-
bol
What is it?
-
Down/minus
Used to decrease cook
/ end time, remove
minutes from the
minute minder and
adjust the time of day.
Also for listening to
and setting the alarm
tone.
+
Up/plus
Used to increase
cook / end time, add
minutes to the minute
minder and adjust the
time of day.
FUNC-
TION
or
MODE
Function button
Used to select the
functions available on
this timer.
Press once for: Minute
Minder.
Press twice for: Cook
time
Press three times for:
End time.
How to use these
functions is explained
later on in this sec-
tion.
The ‘function’ button in the centre is used
for setting the minute minder and setting
up the automatic cooking. See below for
details.
Symbols on the LED display.
This ‘A’ symbol appears when either
a semi, or fully automatic program is
selected.Thissymbolwillashwhilea
program is being set.
Once a program is set the symbol will
light up, and remain lit until the alarm
sounds, or the program is cancelled.
This bell symbol appears when the Minute
Minder function has been selected.
While the Minute Minder is being set, the
Bellsymbolashes.Oncethelengthof
time is set, the Bell symbol remains lit
until the time runs down, or the function
is cancelled.
This message and ‘A’ symbol appear when
you are asked to set the length of time
you require the oven to cook automati-
cally for.Using the Up and Down buttons
adjusts this accordingly.
This message and ‘A’ symbol appear when
USING THE CLOCK/PROGRAMMER-ELEC(if fitted)