Filter
Top Products
Before You Call For Service
If you are having an operating problem,
check the chart to see what the cause
might be before you call for assistance.
OPERATING PROBLEM
Nothing operates.
CHECK IF
. Oven is properly connected to a live
circuit with the proper voltage.
1 Fuse has blown or circuit breaker
has tripped.
. Oven Temperature Control is
turned to a temperature setting.
WHAT TO DO
. Contact an authorized RoperSM
service technician to reconnect
oven to electrical supply. (See
Installation Instructions.)
. Replace fuse or reset circuit
breaker.
. Turn Oven Temperature Control to
the desired temperature setting.
If the Self-Cleaning cycle will
not operate.
1 The clock shows the right time of
. Reset clock, if necessary.
day.
. The Lock Lever is all the way to the
. Slide Lock Lever all the way to the
right
right, if necessary.
. You have set a delay start time.
Cooking results aren’t
what you expected.
. Pans are the size called for in the
recipe.
. You are following a tested recipe
from a reliable source.
l When baking, you have preheated
the oven as the recipe calls for.
1 When baking, you have allowed
1 l/2 to 2 inches (4-5 cm) on all
sides of the pans for air circulation.
. When broiling, you have not
completely closed the oven door.
. Use correct-size pans.
1 Modify recipe or find a new recipe.
1 Preheat the oven according to
recipe’s specifications.
. Reposition pans for best air
circulation.
1 Open oven door to the Broil Stop
position.
Page 14