Filter
Top Products
3
Note: If cabinet has a drawer, a 4" (10.2 cm) depth
clearance from the countertop to the top of the drawer
(or other obstruction) in base cabinet is required.
Product dimensions
Junction box, or
outlet –
12" (30.5 cm) min.
from bottom of countertop.
10" (25.4 cm) from right side
of cabinet.
21"
(53.3 cm)
depth
30" (76.2 cm) or
36" (91.4 cm) width
2-7/8" (7.3 cm)
burner box height
18" (45.7 cm) min.
clearance upper
cabinet to countertop
within minimum
clearances to cooktop
Do not seal
cooktop to
countertop.
3" min.
(7.6 cm)
13" (33 cm)
recommended
upper cabinet
depth
Ả
Ạ
1" (2.5 cm) min. distance to
nearest left and right side
combustible surface above
cooktop.
combustible area
above
countertop
*
Note: 24" (61 cm) min. clearance if bottom
of wood or metal cabinet is protected by
not less than 1/4" (0.6 cm) flame retardant
millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.04 cm)
stainless steel, or 0.024"(0.06 cm)
aluminum or 0.020" (0.05 cm) copper.
30" (76.2 cm) min. clearance between top
of cooking platform and bottom of
unprotected wood or metal cabinet.
21"
(53.3 cm)
16-1/2"
(41.9 cm)
2-7/8" (7.3 cm)
burner box height
18" overall
(47.7 cm)
31-1/2" (80.0 cm) or
37-1/2" (95.3 cm) overall
ạ
ẠạẢả
21" 18-5/8" 15-1/2" 21" 1-5/16"
(53.3 cm) (33.7 cm) (34.4 cm) (53.3 cm) (3.4 cm)
30" 28-7/8" 18-5/8" 30" —
(76.2 cm) (73.3 cm) (47.3 cm) (76.2 cm)
36" 35" 18-5/8" 36" —
(91.4 cm) (89 cm) (47.3 cm) (91.4 cm)
Cooktop width
Illustration dimensions
Cutout dimensions/requirements
Important note on base cabinet construction: After making
the countertop cutout, some installations may require
notching down the base cabinet side walls to clear the
burner box. To avoid this modification, use a base cabinet
having sidewalls wider than the cutout.
ả
back edge
of cutout
rear of cabinet
or rear wall
under
countertop
RCS2002
RCS2012
series only
11/16"
(1.7 cm)
min.
ả
See
NOTE*
for
minimum
clearances.