Filter
Top Products
Solid Element Surface Units
3. IMPORTANT:
After cleaning,
apply a thin coat of salt-free oil to
the CCCL surface units, then heat
3-5 minutes.
DO NOT
leave ele-
ments unattended while ON. Oil
may smoke slightly when heated.
If surface units have dark spots
caused by grease and food, the
oil treatment will improve their ap-
pearance but not eliminate the
spots. NOTE: Optional Eiectroi
dressing can be applied to the
surtace units to improve their
appearance.
2. For best results, wipe off surface
units with a damp soft cloth and
soapy water after each use.
Burned-on food may be removed
with a soapy scouring pad. The
red spot in the center of the sur-
face unit will gradually wash off.
This is normal and will not affect
the operation of the surface unit.
4. The stainless steel trim rings will
gradually yellow from the heat
of the surface units and pans. This
is normal. The yellowing can be
removed by using stainless steel
cleaner or Cook Top Polishing
Creme on the trim rings.
To obtain order information
for Cook Top Polishing Creme
(PN 814009) or Electrol dressing
(PN 814030), write to:
Whirlpool Corporation
Attention: Customer Service Dept.
1900 Whirlpool Drive
LaPone, IN 46350s
8