Filter
Top Products
Option Selector Switch
Before starting your dishwasher
1. Spin the Upper Spray Arm to make
3. Run hot water at sink nearest dish-
sure nothing will stop it from turning
washer until it is hot. Turn it off.
freely
2. Close and latch the door.
Starting your dishwasher
HEAVY WASH Cycle...
1. Make sure Cycle Control Knob points
to dot marked HEAVY WASH.
2. Select option.
3. Without turning it, pull the Cycle Con-
trol Knob out to start the Cycle.
RINSE & HOLD
USE AIR DRY
NORMAL WASH Cycle...
1. Turn Cycle Control Knob until it stops
RINSE & HOLD Cycle...
at dot marked NORMAL WASH.
1. Select AIR DRY Option only.
2. Unlatch door and open slightly
2. Select option. 3. Pull Cycle Control Knob out.
3. Without turning it, pull the Cycle Con-
4. Turn Control Knob clockwise to dot
trol Knob out to start the Cycle.
marked RINSE & HOLD.
5. Close and latch the door to start the
cycle.
Changing a setting
2. With the Cycle Control Knob pulled
out,
You can change a setting any-time during
turn clockwise to the cycle you want.
any cycle.
3. Be sure the detergent dispensers are filled
1. Unlatch the doorto stop the cycle, but don’t
properly for the new cycle.
open it until the spray arms stop spinning. 4. Latch the door to start the cycle.
8