Filter
Top Products
Clean Selector Buttons
-
ijption S
Starting your dishwasher
POTS &PANS Cycle...
1. Make sure Cycle Control Knob points
to dot marked POTS & PANS.
2. Push POTS & PANS Clean Selector
Button.
3. Push button for option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
HEAVY WASH Cycle...
1. Make sure Cycle Control Knob points
to dot marked HEAVY WASH.
2. Push HEAVY WASH button.
3. Push button for option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
NORMAL WASH Cycle...
1. Turn Cycle Control Knob clockwise
until it stops at dot marked NORMAL
WASH.
2. Push NORMAL WASH button.
3. Push button for option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
LOW ENERGY WASH Cycle...
1. Push LOW ENERGY WASH Button.
2. Turn Cycle Control Knob clockwise to
dot marked LOW ENERGY WASH.
3. Select option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
RINSE & HOLD Cycle...
1. Select AIR DRY Option only.
2. Turn Control Knob clockwise to dot
marked RINSE & HOLD.
3. Pull Control Knob out to start cycle.
Changing a setting
2. Turn the Cycle Control Knob clockwise to
the cycle you want.
You can change a setting anytime during
3. Be sure detergent dispensers are filled
any cycle.
1. Push in the Cycle Control Knob to stop the
cycle.
properly for the new cycle.
4. Pull out the Cycle Control Knob to start the
cycle.
To add a dish after starting
1.
2.
3.
To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LOW ENERGY WASH.
Unlatch the door to stop the cycle, but don’t
open it until the spray arms stop spinning.
Open the door and add the dish.
4.
5.
Close the door.
Do not latch it.
Wait 30 sec-
onds for air in the dishwasher to warm up.
This helps reduce the amount of moisture
that can come from the vent when restart-
ing the cycle.
Latch the door. The dishwasher will start
from where it stopped.
HI-TEMP WASHING Option
When this option is selected, water for the
main wash and the final rinse is heated (except
in RINSE & HOLD] to 145°F (63°C). Washing and
rinsing action in those parts of the cycle will
be longer if the water is heated. HI-TEMP wash-
ing is automatic in POTS & PANS.
a