Whirlpool DU7216XS Dishwasher User Manual


 
I
CYCLE CONTROL KNOB
HEAT DRY or AIR DRY?
If the HEAT DRY Optton is selected, air in the
dishwasher is heated during the “dry” par-t of
the cycle.
If the AIR DRY Optton is selected, air in the
dishwasher is not heated. Using this option helps
save energy, but dishes take longerto dry (over-
night] and some water spotting may result.
Some items (such as plastics) may need towel
drying.
For best results, use a solid rinse aid
Changing a setting
You can change a setting anytime during
any cycle.
1.
Lift up on the door latch to stop the cycle.
Don’t open the door until the spray arms stop
spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Press door firmly to latch it. The dishwasher
will automatically start the new cycle.
To add a dish after starting
1. To be sure the added item is washed and
4. Close the door. Do not latch it. Wait 30 sec-
rinsed, make sure the Cycle Control Knob
onds for air in the dishwasher to warm up. This
has not passed LIGHT WASH.
helps reduce the amount of moisture that
2. Lift up on the door latch to stop the cycle.
can come from the vent when restarting the
Don’t open the door until the spray arms stop
cycle.
spinning.
5. Press door firmly to latch it The dishwasher
3. Open the door and add the dish.
will start from where it stopped
9