Whirlpool DU7400XS Dishwasher User Manual


 
Before starting your dishwasher
1. Read “Important Safety Instructions” on page
2 before starting your dishwasher.
2. Spin the Upper and Lower Spray Arms to
makesure nothing will stopthem from turning
freely.
3. Push door firmly when closing and it will auto-
matically latch.
4. Run hot water atsink nearest dishwasher until
it is hot. Turn it off.
Starting your dishwasher
POTS & PANS Cycle...
1. Push POTS & PANS Cycle Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to line
marked POTS & PANS. (POTS & PANS and NOR-
MAL WASH Cycles share the same spot on the
dial. The Selector Buttons determine which
cycle operates.)
The dishwasher will automatically start that
cycle.
LIGHT WASH Cycle...
1. Push LIGHT WASH Cycle Selector Button.
- LIGHT WASH and NORMAL WASH Cycles
share the same Cycle Selector Button. The
Control Knob setting determines which
cycle operates.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to line
marked LIGHT WASH. The dishwasher will
automatically start that cycle.
Selecting a cycle
CYCLE SELECTOR BUllONS
NORMAL WASH Cycle...
1. Push NORMAL WASH Cycle Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to line
marked NORMAL WASH. (NORMAL WASH and
POTS & PANS Cycles share the same spot on
the dial. The Selector Buttons determine
which cycle operates.)
The dishwasher will automatically start that
cycle.
RINSE & HOLD Cycle...
1. Push NORMAL WASH Cycle Selector Button.
2. Select AIR DRY Option only.
3. Turn Cycle Control Knob clockwise to line
marked RINSE & HOLD. The dishwasher will
automatically start that cycle.
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63’C) in both
washes and the last rinse [marked *).
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.] Cycle time is
about 63 minutes.
.Iwl,m,m--
LIGHT WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 58
minutes.
8