Filter
Top Products
-m
B\
\
OPTION SELECTOR BUllONS
I-
OOR LATCH
CYCLE CONTROL KNOB
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 12 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the
night) and some water spotting may result.
dishwasher is heated during the “dry” part of Some items (such as plastics) may need towel
the cycle.
drying.
If the AIR DRY Option is selected, air in the
dishwasher is not heated. Using this option helps
For best results, use a liquid rinse aid such as
save energy, but dishes take longerto dry (over-
Jet-D@
Changing a setting
You can change a setting anytime during
any cycle.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
1. Lift up on the door latch to stop the cycle.
Don’t open the door until the spray arms stop
4. Press door firmly to latch it. The dishwasher
spinning.
will automatically start the new cycle.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
To add a dish after starting
1. To be sure the added item is washed and
4. Close the door. Do not latch it. Wait 30 sec-
rinsed, make sure the Cycle Control Knob onds for air in the dishwasher to warm up. This
has not passed LIGHT WASH. helps reduce the amount of moisture that
2. Lift up on the door latch to stop the cycle.
can come from the vent when restarting the
Don’t open the door until the spray arms stop
cycle.
spinning.
5. Press door firmly to latch it. The dishwasher
3. Open the door and add the dish.
will automatically start where it stopped.